+61 2 8097 7004 · Lane Cove West, NSW

Cathodic Protection Monitoring and Maintenance

Cathodic protection (CP) is a proven way to protect reinforced concrete and steel structures from corrosion, but only when the system is monitored and maintained properly throughout its life. Australian Standard AS 2832.5 provides guidelines for the design, installation, commissioning and monitoring of CP systems on steel in concrete structures.

Remedial Technology has around 40 years of experience in cathodic protection and monitors more than 40 CP systems across Australia for port authorities, state road and transport agencies and local councils. Our engineers, technicians and MicroNex development team handle every part of the service in-house, from auditing existing systems and upgrading control equipment, to 24/7 remote monitoring through our Cathodic Protection Management System (CPMS) and ongoing testing and maintenance on site.

The challenge for owners of older CP systems

Many asset owners now look after a portfolio of CP systems installed over twenty or thirty years, by different contractors, using different equipment. Older control units can be obsolete or hard to service, some systems have no remote access at all, and records are spread across paper files, drawings and spreadsheets. Confirming that every structure is protected means sending people to site, and small faults can go unnoticed until they become expensive problems.

Our cathodic protection monitoring and maintenance service

CP system audits

a full review of the condition, performance and records of each existing system.

Upgrades

replacing ageing control units with MicroNex power supply units, adding remote monitoring, and re-commissioning systems that have fallen out of service.

24/7 remote monitoring

every system connected to CPMS, so performance can be checked online at any time.

Remote adjustment

system settings optimised without sending a crew to site.

Scheduled testing and inspection

in line with AS 2832.5.

Targeted maintenance

site visits planned using live data, so our technicians arrive knowing what needs fixing.

Reporting and records

regular performance reports and a complete record of every system, available to you at any time.

Testing in line with AS 2832.5

Our monitoring and maintenance programs include:

  • Selecting and confirming the protection criteria for each system
  • Instant OFF potential and depolarisation measurements
  • Functional checks of control units, reference electrodes, junction boxes and cabling
  • Yearly inspections and performance reporting, with clear recommendations
  • Calibration checks, using external data logging where needed

Why asset owners choose Remedial Technology

Everything in-house

audits, design, supervision, control systems, monitoring and maintenance by one experienced team

Full visibility of every system's condition and performance, online

Lower ongoing costs through fewer site visits, early fault detection and optimised settings

Faster response, because the team monitoring your system is the team that maintains it

Open, flexible service

your data and records stay accessible to you, and our control systems use non-proprietary components that any qualified technician can service

Australian-made control systems, designed and assembled by MicroNex, our research and development division

Common questions

What is cathodic protection monitoring?

Cathodic protection monitoring is the regular measurement of a CP system's performance, including output current and voltage and steel potentials from reference electrodes, to confirm the structure is protected. With remote monitoring, this data is sent from site automatically and can be reviewed online at any time.

How often should a cathodic protection system be tested?

AS 2832.5 sets out guidance for monitoring and testing CP systems on steel in concrete structures. The right schedule depends on the system and the asset, so we set a program for each one, combining continuous remote monitoring with periodic on-site testing and a yearly inspection.

Can remote monitoring be added to an older CP system?

Yes. Many existing ICCP systems can be fitted with remote monitoring, and ageing control units can be replaced with modern MicroNex units, so older systems can be managed online through CPMS.

Can you take over CP systems installed by other contractors?

Yes. We start with an audit of each system, then bring it into our monitoring and maintenance program, whoever originally installed it.

Do you work outside Sydney?

Yes. We provide cathodic protection monitoring and maintenance across Australia, both onsite and remotely.

Cathodic Protection Management System (CPMS)

Remedial Technology monitors over 40 cathodic protection systems around Australia. In order to organise decades of data from these systems, Remedial Technology proudly developed CPMS.

CPMS is a state-of-the-art management tool for the efficient monitoring and maintenance of cathodic protection systems developed by Remedial Technology for Clients.

Learn More About CPMS
CPMS cathodic protection remote monitoring
Construction and Design DrawingsReporting - Performance and Functional ChecksMaintenance Schedules and WorksStructure Specific InformationWebsiteCloud Service

Book a CP system audit

Whether you have a single structure or a network of older systems, talk to our team about an audit and how in-house monitoring and maintenance can improve visibility and reduce your ongoing costs.

Contact Us
Contact Us
+61 2 8097 7004 Unit 5 4-6 Chaplin Drive, Lane Cove West, NSW Contact Us